Primos Gen 3 Trigger Stick and Saddle Rifle Mount

Description

Primos Gen 3 Trigger Stick and Saddle Rifle Mount

Like every Trigger Stick, the Primos Gen 3 Trigger Stick and Saddle Rifle Mount adjusts to your desired height with just one hand and the pull of a trigger. The new Locking Leg Angles give you more stability at more angles in the field. The new Quick Detach Yoke System with Integrated Lock makes it easier than ever to switch from gun to optics and back again. Smoother panning action helps you rotate, scan and find your perfect shot effortlessly. It’s the next level of Trigger Stick to give you the next level of confidence in every shot in all terrain – standing, sitting, or kneeling!

• Min Height Folded up 102cm
• Min Height Deployed 57cm
• Max Height Folded 166cm
• Weight 1.42kg

• New Quick Detach Yoke System with Integrated Lock
• New Leg Angle Lock
• New Contoured Grip with No-Slip Backbone
• Strengthened Rotating Joint for Smooth Panning
• New Heavy Duty look with Dark Earth Accents
• Adjustable “24-62″

• Cradle slide is spring loaded,screws in & out, & fits to a standard tripod with the nut inserted, so anything with that fitting.  Or any stick with a 1/4 unc 20 tpi screw
• Suited for Rifles, Air Rifles, and Air Soft.
• full extension of the clamp is 27 mm upto  70 mm gap
• V-Tenons are strengthened with 2x 4mm steel pins in each leg.
• Sides & base are covered with a 3 mm neoprene rubber to protect your gun.
• Side plates are 14 mm thick excluding neoprene.
• 3d printed thumb turn with 8 x 1.25 steel stud
• Approximate overall dimensions are 90mm long * 85mm deep * 100mm for cradle + thumb turn.
•  Cradle slide is spring loaded,screws in & out, & fits to a standard tripod with the nut inserted, so anything with that fitting.  Or any stick with a 1/4 unc 20 tpi screw
• Amount of movement is 27 mm upto  70 mm gap
• V-Tenons are strengthened with 2x 4mm steel pins in each leg.
• Sides & base are covered with a 3 mm neoprene rubber to protect your gun.
• Most suited to pcp air guns.
• Side plates are 14 mm thick excluding neoprene.
• 3d printed thumb turn with 8 x 1.25 steel stud.
• Approximate overall dimensions are 90mm long * 85mm deep * 100mm for cradle + thumb turn.